VNS provides ship repair and marine services in South Van Phong Port, Vietnam, supporting bulk carriers, wood chip carriers, general cargo vessels, and other commercial vessels calling at the port and anchorage. Our services cover hull, structural, and cargo hold repairs, engine room and deck machinery, electrical and navigation systems, and underwater inspection and repair.
We also handle cargo hold and tank cleaning, safety inspections, load testing, and spare parts supply. At South Van Phong, VNS can arrange technicians at berth or anchorage, with the work planned around the vessel’s schedule and port requirements.
South Van Phong Port, also known as South Van Phong International Port, is located in South Van Phong Bay, in the Ninh Hoa area of Khanh Hoa, on Vietnam’s south-central coast. It is operated by South Van Phong International Port JSC and handles general cargo, bulk cargo, and liquid cargo.
Wood chips are the port’s main export, while domestic cargo includes bulk cement. In addition, the terminal can handle containers and bitumen. However, berth, draft, and cargo conditions vary by vessel. Therefore, these details should be confirmed with the terminal and local agent before arrival.
Ship Repair In South Van Phong Port For Bulk And Wood Chip Vessels
Wood chip carriers and other bulk vessels at South Van Phong follow loading plans set by cargo availability and berth schedules. For this reason, repair timing and site access need to be planned for each job.
VNS plans each repair around the vessel type, cargo, and working location. Before mobilization, we confirm the vessel’s ETA and ETB, access requirements, and any necessary port permits. We then agree on the work scope with the Master or Chief Engineer.
Ship Repair Services In South Van Phong
VNS carries out pier and afloat repair work, with the scope depending on the vessel’s location and local port requirements.
Hull, Structural & Cargo Hold Repairs
- Hull and structural steel repair, both emergency and permanent, including plate renewal and insert plates
- Welding and fabrication work for hull, deck, and piping structures
- Pipeline repair, renewal, and fabrication, including valve replacement
- Accommodation ladder, gangway, and handrail repair or installation
- Load line and draft mark welding and marking
- Hatch cover panel, rubber packing, and locking device repair
- Cargo hold steel repair, including tank top plate, side frame, and hold ladder repair
Engine Room & Machinery Services
- Main and auxiliary engine overhaul, maintenance, and troubleshooting
- Turbocharger overhaul and dynamic balancing
- Fuel pump (F.O. pump) and engine governor overhaul, inspection, and calibration
- Boiler and economizer repair, troubleshooting, and cleaning
- Air conditioning and refrigeration system repair
- Pump repair and overhaul
- Machining of shafts, bushings, and spindles
- Reconditioning of engine spares and components, including piston crowns, exhaust valves, spindles and seats, and crankshafts
- Reconditioning of pump shafts, impellers, and other machinery parts
Deck Machinery, Cargo Gear & Load Testing
- Hydraulic repairs for cranes, grabs, and hatch cover cylinders
- Deck crane repair, including gearbox, hoisting drum, brake, and wire rope work
- Rubber conveyor belt repair, splicing, and replacement
- Windlass, mooring winch, and capstan repair
- Hydraulic motor and pump repair and overhaul, and hydraulic pipeline renewal
- Hydraulic system troubleshooting, flushing, and pressure testing
- Load testing with load cells and water bags for deck cranes, provision cranes, engine room cranes, monorail cranes, and accommodation ladders
Electrical & Automation Systems
- Electric motor rewinding and bearing replacement
- Generator and alternator repair
- Electrical fault finding, and cable repair or renewal
- Switchboard, starter, and control panel repair
- Sensor, alarm, and control system troubleshooting
Navigation & Communication Equipment
- Annual inspection of marine navigation equipment
- Radar troubleshooting, repair, software updates, and calibration
- Magnetic compass adjustment and deviation calibration
- MF/HF radio repair, troubleshooting, and software updates
- VDR/SVDR installation, repair, and updates
- GMDSS and VDR annual survey and inspection
- Navigation and communication equipment reconditioning or new installation
Underwater Inspection & Repair In South Van Phong
VNS provides underwater inspection and repair services at South Van Phong, subject to local port and berth requirements. Our team also works with experienced commercial divers to inspect, clean, and repair underwater parts of the vessel. Depending on the approved scope, services may include the following:
Inspection & Survey
- Hull inspection, checking for damage, corrosion, cracks, and wear
- Propeller inspection for damage and wear that could affect performance
- Surveys, including UWILD, where permitted by the vessel’s classification society and applicable requirements
Cleaning & Maintenance
- Hull cleaning, removing marine growth, barnacles, and debris
- Propeller polishing
- Anode replacement
- Sea chest cleaning
Repair & Recovery
- Welding and steel repair
- Leak repair
- Replacement of selected equipment such as echo sounders and speed logs
- Blanking of overboard pipes so that crew can replace overboard valves
- Salvage and recovery of lost or damaged equipment and materials, subject to the situation
Cargo Hold & Tank Cleaning
Wood chip and other bulk carriers at South Van Phong may require cargo hold cleaning between cargoes. For example, cleaning may be needed to remove wood chip residues before loading the next shipment.
VNS can also arrange ballast tank and fuel oil tank cleaning, depending on the vessel’s requirements. Please provide the tank details, previous cargo information, and required cleaning standard so that we can assess the scope and prepare a quotation.
Safety, Inspection & Survey Support
VNS also supports safety equipment, statutory inspections, and survey requirements on board, including:
- Annual inspection of fixed firefighting equipment, including CO2, foam, and dry powder systems and fire detection and alarm systems
- Servicing of portable fire extinguishers, fire hoses, nozzles, and fire pumps
- Servicing of lifesaving equipment
- Non-destructive testing (NDT), including ultrasonic testing, dye-penetrant testing, magnetic testing, and thickness gauging
- Ship condition surveys and general audits
- Coordination with classification societies for certification and survey attendance
Where required, VNS can coordinate these services alongside other repairs, helping to avoid a separate vessel visit.
Marine Spare Parts
Vessels working a short berth window at South Van Phong benefit from having parts ready before the repair starts. For this reason, we source and arrange delivery of engine, navigation, hydraulic, and electrical equipment, along with engine and deck stores, marine tools, and safety materials. To avoid delays, please send part numbers or maker details with your enquiry, so we can confirm availability and delivery to the berth or anchorage.
Why Choose VNS For Ship Repair In South Van Phong?
- Experience across vessel types — VNS supports wood chip carriers, bulk carriers, and general cargo vessels. Each job is therefore tailored to the vessel’s equipment and cargo requirements.
- Berth and anchorage attendance — technicians and divers can attend vessels alongside or at anchorage, subject to local requirements.
- Scope confirmed before mobilization — before work begins, we confirm the vessel’s particulars, working location, access requirements, and scope with the Master or Chief Engineer. We then arrange the required attendance.
- One point of contact — VNS coordinates mechanical, hydraulic, electrical, underwater, cleaning, and marine equipment services. This helps ensure that technicians, equipment, and spare parts are arranged according to the agreed scope.
- Class and survey support — we can also coordinate work when it needs classification society attendance, working directly with the surveyor.
- Clear quotation and reporting — we confirm the scope and quotation before work starts. In addition, we inform you promptly of any changes to the schedule.
South Van Phong Port And Other Locations We Serve
Besides South Van Phong, VNS provides ship repair and marine services at nearby ports on the south-central coast, including Cam Ranh and Quy Nhon. We also serve other ports and anchorages across Vietnam. See our Ports & Anchorages Coverage page for the full list of locations.
Contact VNS For South Van Phong Port Services
If you need ship repair support at South Van Phong Port, send us your vessel details and repair scope for a prompt quotation. To help us prepare an accurate quotation, please provide the following details:
- Vessel name and IMO number
- Vessel type and main particulars
- South Van Phong berth or anchorage
- ETA / ETB
- Required scope of work
- Photos or technical drawings, where available
- Class or survey requirements, if applicable
Once we receive these details, our team will review the requirements and arrange technicians, divers, spare parts, or other marine services accordingly.
VNS – Vietnam Ship Services Company
Head Office – Ho Chi Minh City
No. 8 Hoang Minh Giam Street, Ward 9, Phu Nhuan District, Ho Chi Minh City, Vietnam
Hai Phong Branch
213A Lach Tray Street, Ngo Quyen District, Hai Phong City, Vietnam
Phone: +84 869 655 569
Email: vietnamshipservice@gmail.com | vns.shiptech@gmail.com
