Project Overview
In March 2023, VNS – Vietnam Ship Services Company carried out accommodation ladder repair on the aluminium ladder of a bulk carrier at Cam Pha Anchorage, Quang Ninh, Vietnam. Because the vessel was working cargo at anchor, our team boarded by launch boat and completed the job on board. First, we laid the ladder on deck and numbered every cracked joint. Then we re-welded the cracked stanchion bases and step supports and checked the welds with dye penetrant testing. Finally, we tested the ladder with its winch and returned it to the stowed position.
Project Information
- Vessel Type: Bulk Carrier
- Location: Cam Pha Anchorage, Quang Ninh, Vietnam
- Service: Accommodation Ladder Repair
- Ladder Type: Aluminium accommodation ladder
- Scope: Repair of cracked welded joints on the accommodation ladder
- Completed: March 2023
- Project Execution: VNS Hai Phong Branch
Accommodation Ladder Repair Scope of Work
At Cam Pha, vessels load and discharge bulk cargo at anchor, so there is no quay. As a result, the accommodation ladder is the main access for pilots, agents, surveyors and service teams arriving by launch boat. Over time, the aluminium ladder had developed cracks at the welded joints between the stringers and the handrail stanchions and step supports. These cracks required repair before the ladder could continue to be used safely. Accommodation ladders are important means of access for personnel boarding and leaving ships. Under SOLAS regulation II-1/3-9, these arrangements must be inspected and maintained in suitable condition for their intended purpose, and the IMO provides further guidance on their construction, maintenance and inspection in MSC.1/Circ.1331/Rev.1. For this project, the owner asked VNS to repair the cracked welded joints while the vessel remained at anchor and to verify the repaired areas with dye penetrant testing (PT).
Dismantling and Preparation
- First, our team lifted the ladder in-board and laid it on deck, so the repair could be done safely and not over the water
- Next, we removed the bolted fittings and pins needed to reach the damaged joints
- After that, we inspected every joint, numbered each cracked weld and ground out the cracks


Re-Welding of Cracked Joints
- Then, our welders re-welded the cracked joints at the handrail stanchion bases and step supports, using welding equipment and consumables suitable for aluminium
- Before welding, they cleaned each joint back to bright metal, because aluminium needs a clean surface free of oxide and dirt for a sound weld
- Each repaired joint kept its number, so we could track it through testing and reporting

Weld Inspection
- Once welding was complete, our certified NDT technician carried out dye penetrant testing (PT) on the repaired welds. All inspected welds passed the PT examination.

Operation Test and Stowage
- Finally, we refitted the removed parts, tested hoisting and lowering with the ladder winch, and returned the ladder to its stowed position

Work Execution
Before mobilising, VNS agreed the scope in advance based on the crew’s photos. Our team then travelled from our Hai Phong branch and boarded the vessel by launch boat, together with aluminium welding equipment, grinders, NDT materials and consumables.
Working at anchor meant the team had to bring everything needed for the job in one trip. In addition, cargo operations with barges continued alongside, so we kept the ladder and work area on deck clear of cargo handling. As a result, the team completed the repair without interrupting the vessel’s cargo operations.
Project Completion
Following the repairs, all repaired joints passed dye penetrant testing, and the accommodation ladder operated normally during the final hoisting and lowering test. VNS then returned the ladder to its stowed position and issued a service report to the vessel and her technical manager, including repair photographs, the numbered joint list and PT results.

Repairs at anchor like this one are part of our pier and afloat ship repair services for vessels calling at ports and anchorages across Vietnam. With support from our Hai Phong branch, VNS can arrange onboard inspection, aluminium and steel repairs, welding and NDT for vessels in northern Vietnam.
Related Services
More Projects: Vessel Winch Platform Renewal in Vietnam · Container Socket Renewal at Hai Phong Port · View All Projects
Contact VNS
Need an aluminium or steel accommodation ladder repaired while your vessel is at Cam Pha, Hon Gai or any Vietnamese anchorage? Send us the vessel name, location, ETA and photos of the damage, and we will reply with a scope and quotation.
Contact Us
VNS – Vietnam Ship Services Company
Head Office – Ho Chi Minh City
No. 8 Hoang Minh Giam Street, Duc Nhuan Ward, Ho Chi Minh City, Vietnam
Hai Phong Branch
213A Lach Tray Street, Gia Vien Ward, Hai Phong City, Vietnam
Phone: +84 869 655 569
Email: vietnamshipservice@gmail.com | vns.shiptech@gmail.com
