Project Overview
In March 2023, VNS – Vietnam Ship Services Company carried out winch platform renewal on a container vessel at Hai Phong Port, Vietnam. The mooring winch platforms on the vessel’s mooring deck had chequered steel plate tops. The owner decided to replace them with open steel grating. First, our team removed the old platforms. Then, using materials supplied by the vessel, we fabricated new steel frames from angle bar and fitted new grating panels and grating steps. Finally, we painted the new frames, so the crew had new working platforms at the winch controls before the vessel left Hai Phong.
Project Information
- Vessel Type: Container Vessel
- Location: Hai Phong Port, Vietnam
- Service: Winch Platform Renewal
- Scope: Renewal of the winch platforms with new angle bar frames and steel grating
- Materials: Supplied by the vessel
- Project Execution: VNS Hai Phong Branch
- Completed: March 2023
Mooring Winch Platform Renewal – Scope of Work
Crew members stand on the winch platforms to operate the mooring winches during berthing and unberthing. On this vessel, the platforms were built with chequered steel plate tops on steel frames, with a step at each access point. A solid plate surface can retain rainwater, seawater and other liquids. In contrast, open steel grating allows water and loose debris to pass through, helping to reduce standing water and improve drainage on the mooring deck. For this reason, the owner asked VNS to replace the existing chequered plate platforms with steel grating during the vessel’s call at Hai Phong.


Measuring and Planning
- First, our team measured every platform section and step on board, including the angled sections around the winch bedplates
- Next, we planned the panel layout to suit the existing handrail stanchions and allow practical handling during installation

Removal of the Old Platforms
- Then, we removed the old platforms, including the chequered plate tops, steps and frames
- After that, we prepared the deck at each frame leg position for the new frames
New Frames and Grating Panels
- Next, our fitters fabricated new frames from the vessel’s angle bar to match the original platform positions
- Once each frame was in position, our welders welded its legs to the deck
- Then, our fitters cut the grating panels to size on board, including the angled sections around the winch bedplates
- After that, we fitted the grating panels onto the frames and tack-welded them at the corners
- We also renewed the access steps with grating treads
Painting
- Finally, we applied protective paint to the new frames to help protect the exposed steelwork against corrosion
Work Execution
The scope was agreed in advance with the owner based on the crew’s photos of the existing platforms. The vessel supplied the angle bar and grating, while our Hai Phong branch brought the welding machines, cutting tools and equipment on board at her berth.
Because the platforms run along several mooring winches, we worked section by section rather than removing all platforms at once. In this way, the crew could still reach the winches and the mooring deck stayed safe to walk on throughout the job. At the same time, we kept the work area clear around the mooring lines, as the vessel remained alongside during the repair. As a result, the team completed the renewal within the vessel’s port stay, and the mooring deck was ready for unberthing.
Project Completion
In the end, VNS replaced the old chequered plate winch platforms with new angle bar frames, steel grating panels and grating steps. The open grating surface allows water to drain through, helping to reduce standing water on the platforms around the mooring winch controls. Finally, VNS issued a service report to the vessel and her technical manager with before-and-after photos of each platform section.



Deck repairs like this one are part of our pier and afloat ship repair services for vessels calling at ports and anchorages across Vietnam.
Related Services
More Projects: Container Socket Renewal at Hai Phong Port · Accommodation Ladder Repair at Cam Pha Anchorage · View All Projects
Contact VNS
Need winch platforms, walkways or steps renewed during your next call at Hai Phong or any Vietnamese port? Send us the vessel name, ETA, berth and photos of the existing platforms, and we will reply with a scope and quotation.
Contact Us
VNS – Vietnam Ship Services Company
Head Office – Ho Chi Minh City
No. 8 Hoang Minh Giam Street, Duc Nhuan Ward, Ho Chi Minh City, Vietnam
Hai Phong Branch
213A Lach Tray Street, Gia Vien Ward, Hai Phong City, Vietnam
Phone: +84 869 655 569
Email: vietnamshipservice@gmail.com | vns.shiptech@gmail.com
